﻿Dash Racer Toy Car  |  VT-001  |  version 1.0
======================================================================

DIGITAL FILE ONLY. This download contains files for 3D printing.
No physical product is shipped. You need access to an FDM 3D printer.

Chunky toy race car with four rolling wheels. Three sizes, each with its own axle size and clearances. Prints without supports in separate colours.

1. WHAT IS IN THIS DOWNLOAD
------------------------------
  3MF/L_140mm_all_parts.3mf
  3MF/M_090mm_all_parts.3mf
  3MF/S_060mm_all_parts.3mf
  LICENSE_EN.txt
  LICENSE_HE.txt
  README_EN.txt
  README_HE.txt
  STL/L_140mm/axle_x2.stl
  STL/L_140mm/body.stl
  STL/L_140mm/canopy.stl
  STL/L_140mm/wheel_x4.stl
  STL/M_090mm/axle_x2.stl
  STL/M_090mm/body.stl
  STL/M_090mm/canopy.stl
  STL/M_090mm/wheel_x4.stl
  STL/S_060mm/axle_x2.stl
  STL/S_060mm/body.stl
  STL/S_060mm/canopy.stl
  STL/S_060mm/wheel_x4.stl

  STL files are in millimetres, already in the recommended print orientation.
  3MF files contain all parts of one size as separate objects laid out flat, with a suggested
  colour per object. Assign your own filaments per object in your slicer.

2. DESIGN ASSUMPTIONS
------------------------------
  FDM (filament) printing, 0.4 mm nozzle, 0.2 mm layers, design build volume 220 x 220 x 220 mm.
  These are working assumptions, not a guarantee of compatibility with every printer.

3. SIZES AND PARTS
------------------------------
  Medium, 90 mm: assembled size 90 x 40 x 28 mm (L x W x H), 8 printed piece(s), 4 file(s)
    - STL/M_090mm/body.stl  x1  colour: Red  print size 90 x 40 x 21 mm
        Car body. Print flat on its underside.
        supports: slicer auto-support adds about 412 mm of filament; see notes
        slicer estimate (each): 2h 17m 50s, 23.04 g
    - STL/M_090mm/canopy.stl  x1  colour: Black  print size 36 x 25 x 12 mm
        Cockpit canopy, drops into the pocket on the body.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 23m 36s, 4.22 g
    - STL/M_090mm/wheel_x4.stl  x4  colour: Black  print size 20 x 20 x 8 mm
        Wheel. Print with the spoke face up.
        supports: slicer auto-support adds about 43 mm of filament; see notes
        slicer estimate (each): 12m 23s, 1.79 g
    - STL/M_090mm/axle_x2.stl  x2  colour: Gray  print size 4 x 37 x 3 mm
        Axle with two flats. Print lying on a flat.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 3m 8s, 0.57 g
    Total for this size (all pieces): about 3h 37m, 35.6 g of filament

  Small, 60 mm: assembled size 60 x 27 x 19 mm (L x W x H), 8 printed piece(s), 4 file(s)
    - STL/S_060mm/body.stl  x1  colour: Red  print size 60 x 27 x 14 mm
        Car body. Print flat on its underside.
        supports: slicer auto-support adds about 344 mm of filament; see notes
        slicer estimate (each): 58m 34s, 8.93 g
    - STL/S_060mm/canopy.stl  x1  colour: Black  print size 24 x 17 x 8 mm
        Cockpit canopy, drops into the pocket on the body.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 9m 50s, 1.6 g
    - STL/S_060mm/wheel_x4.stl  x4  colour: Black  print size 13 x 13 x 5 mm
        Wheel. Print with the spoke face up.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 7m 18s, 0.68 g
    - STL/S_060mm/axle_x2.stl  x2  colour: Gray  print size 3 x 24 x 3 mm
        Axle with two flats. Print lying on a flat.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 1m 20s, 0.21 g
    Total for this size (all pieces): about 1h 40m, 13.7 g of filament

  Large, 140 mm: assembled size 140 x 62 x 44 mm (L x W x H), 8 printed piece(s), 4 file(s)
    - STL/L_140mm/body.stl  x1  colour: Red  print size 140 x 62 x 32 mm
        Car body. Print flat on its underside.
        supports: slicer auto-support adds about 1017 mm of filament; see notes
        slicer estimate (each): 5h 51m 21s, 67.14 g
    - STL/L_140mm/canopy.stl  x1  colour: Black  print size 56 x 39 x 19 mm
        Cockpit canopy, drops into the pocket on the body.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 1h 4m 2s, 12.32 g
    - STL/L_140mm/wheel_x4.stl  x4  colour: Black  print size 31 x 31 x 12 mm
        Wheel. Print with the spoke face up.
        supports: slicer auto-support adds about 80 mm of filament; see notes
        slicer estimate (each): 32m 33s, 5.16 g
    - STL/L_140mm/axle_x2.stl  x2  colour: Gray  print size 5 x 58 x 4 mm
        Axle with two flats. Print lying on a flat.
        supports: none (slicer generated no supports at 45 deg threshold)
        slicer estimate (each): 6m 1s, 1.12 g
    Total for this size (all pieces): about 9h 18m, 102.3 g of filament

4. RECOMMENDED PRINT SETTINGS
------------------------------
  Layer height 0.2 mm, 3 perimeters, 15% infill, no brim unless your first layer needs it.
  Material: PLA or PETG. PETG is tougher for a toy that will be dropped.
  - All parts print without supports in the delivered orientation.
  - The wheel arches have 50-degree sides and a short flat bridge on top, so they need no supports. The axle holes are small round holes that print as they are.
  - The axle has two flats. Print it lying on one flat.
  - If the wheels are too tight or too loose on the axle, adjust XY compensation by 0.05 mm steps and reprint only the wheels.

  The times and weights above were calculated with PrusaSlicer 2.9.7 (command line), generic profile:
  0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15% gyroid infill, PLA 1.24 g/cm3, default speeds.
  They are estimates for that profile only. Your printer and settings will give different numbers.
  The 3MF files were verified to load and slice in PrusaSlicer 2.9.7. Other slicers were not tested.

5. ASSEMBLY
------------------------------
  1. Push one wheel onto one end of an axle, flats aligned, until it stops.
  2. Slide the axle through the hole in the body and push the second wheel onto the other end.
  3. Repeat for the second axle. Check that both axles spin freely.
  4. Drop the canopy into the pocket on top of the body. Glue it if the car is for a small child.

6. EXTRA ITEMS NEEDED
------------------------------
  None required. Optional: a drop of plastic glue for the canopy and wheels. Small parts: not for children under 3.

7. TEST STATUS
------------------------------
  Geometry checks (closed mesh, normals, overlaps, clearances): passed
  Slicer check: done
  Physical test print: NOT done yet. Fits and clearances are design values; you may need to adjust
  them for your printer (for example horizontal expansion / XY compensation).

8. LICENSE
------------------------------
  See LICENSE_EN.txt. Summary: personal printing allowed; you may modify the model and sell
  physical prints; you may not share, upload, distribute or sell the digital files, modified or not.
