עברית
Cup Holder Phone Dock
CR-002

Cup Holder Phone Dock

Stands a phone upright in a car cup holder, leaning back 15 degrees, with a cable channel. One piece, no supports. Not a driving mount.

Coming soon $2.99

Instagram followers get 10% off. Follow @3dmodnest - the discount code is in our story highlight "10% OFF". Enter it on the checkout page.

Get the code on Instagram

Digital download - no physical product is shipped.
All images are computer renders of the actual files, not photos of a print. Printed results will vary.
Not yet test printed on a physical printer.

Sizes

SizeAssembled size (L x W x H)Printed piecesSlicer estimate
Standard, 71 mm top78 x 71 x 118 mm15h 02m, 68.3 g

Estimates from PrusaSlicer 2.9.7 with a generic 0.2 mm PLA profile. Your printer will differ.

Description

A tapered plug for a cup holder, 64 mm wide at the base and 71 mm at the top, with a 13.5 mm slot cut across it and a backrest that rises to 118 mm. The phone drops into the slot and leans back 15 degrees against the backrest, and a channel in the front lip lets the charging cable reach the port. It is meant for passengers and for a parked car, for example to watch something while waiting. It is not a driving mount: it does not clamp the phone, and it must not be used where it could block the gear lever, the controls or the driver's view.

Printing

Designed for FDM printers with a 0.4 mm nozzle and a 220 x 220 x 220 mm build volume. These are working assumptions, not a compatibility guarantee.

Material: PETG or ASA. PLA softens in a hot parked car and is not recommended.

What's in the download

Tags: car phone stand, cup holder, phone dock, car accessory, passenger, 3d print file, STL, no supports