עברית
Twist Planter with Saucer
DC-001

Twist Planter with Saucer

Six-lobe planter that twists and flares as it rises, with a matching saucer. Two parts, two colours, no supports.

Coming soon $2.99

Instagram followers get 10% off. Follow @3dmodnest - the discount code is in our story highlight "10% OFF". Enter it on the checkout page.

Get the code on Instagram

Digital download - no physical product is shipped.
All images are computer renders of the actual files, not photos of a print. Printed results will vary.
Not yet test printed on a physical printer.

Sizes

SizeAssembled size (L x W x H)Printed piecesSlicer estimate
Standard101 x 94 x 109 mm28h 54m, 121.4 g

Estimates from PrusaSlicer 2.9.7 with a generic 0.2 mm PLA profile. Your printer will differ.

Description

A decorative planter with a soft six-lobe outline that turns 55 degrees and flares by 30 percent over its 105 mm height, so the light catches a different facet from every side. The wall is 2.4 mm thick at the base and grows with the flare. The pot has a drain hole and stands on three low ribs inside the saucer, so the roots do not sit in drained water. Both parts print upright without supports. The twist keeps every overhang well under 45 degrees.

Printing

Designed for FDM printers with a 0.4 mm nozzle and a 220 x 220 x 220 mm build volume. These are working assumptions, not a compatibility guarantee.

Material: PETG is recommended for use with water and sun. PLA works indoors but softens in direct sun. FDM prints are not reliably watertight; keep a real plant in an inner pot or seal the inside.

What's in the download

Tags: planter, plant pot, vase, home decor, 3d print file, STL, 3MF, no supports, succulent pot, twisted