






Wave Wall Hook
Sturdy screw-on wall hook with a smooth J curve. One piece, printed on its side for strength, no supports.
Coming soon $2.99
Instagram followers get 10% off. Follow @3dmodnest - the discount code is in our story highlight "10% OFF". Enter it on the checkout page.
Get the code on InstagramDigital download - no physical product is shipped.
All images are computer renders of the actual files, not photos of a print. Printed results will vary.
Not yet test printed on a physical printer.
Sizes
| Size | Assembled size (L x W x H) | Printed pieces | Slicer estimate |
|---|---|---|---|
| Standard | 32 x 24 x 76 mm | 1 | 0h 52m, 11.2 g |
Estimates from PrusaSlicer 2.9.7 with a generic 0.2 mm PLA profile. Your printer will differ.
Description
A wall hook drawn as one continuous 4.5 mm ribbon, 24 mm wide. It is printed lying on its side, so every layer follows the whole hook and the load never pulls layers apart. Two countersunk holes take standard 4 mm screws with flush heads. The hook opening is 23 mm, enough for coats, bags, towels and headphones.
Printing
Designed for FDM printers with a 0.4 mm nozzle and a 220 x 220 x 220 mm build volume. These are working assumptions, not a compatibility guarantee.
Material: PETG recommended for load and bathroom use; PLA works for light items. Use 4 perimeters and 30% infill for heavier loads.
What's in the download
- 3MF/all_parts.3mf
- LICENSE_EN.txt
- LICENSE_HE.txt
- README_EN.txt
- README_HE.txt
- STL/wall_hook.stl
Tags: wall hook, coat hook, towel hook, home organization, 3d print file, STL, no supports, strong print